TM 9-2320-209-10-1 f. Installing 20-inch or 30-inch Augers. (1) Lifting auger from stowed position. PERSONNEL: Two Pick the size auger (1) to be installed on rack bar (2). Pull winch cable (3) out from winch. Place cable (3) under, around, and over strap sheave (4). Bring end of cable forward and over derrick sheave (5). Start engine. (Refer to para 4-6b.) Raise and position derrick tube (6) so that end of winch cable (3) is directly over auger (1) to be used. (Refer to para 4-15c and 4-15d.) If seat (7) gets in the way of derrick (6) take seat off truck. (a) Take safety pin (8) out. (b) Pull retainer pin (9) out. (c) Pull seat (7) up and take out of truck. GO TO FRAME 2 4-331