TM 9-2320-209-10-1 e. Installing 9-inch, 12-inch, and 16-inch Augers. (1) Lifting auger from stowed position. FRAME 1 WARNING To avoid injury to personnel and damage to equipment, do not try to lift the 20-inch and 30-inch augers from their holders by hand. These augers should be lifted with the rear winch and boring machine integral derrick. 1. Pick the size auger (1) to be installed on rack bar (2). 2. Lift holder locking handle (3) out of bracket (4) and holder (5). 3. Pull auger to holder pin (6) out of auger (1) and holder (5). 4. Lift auger (1) out of stowed position. GO TO FRAME 2 4-329