TM 9-2320-209-10-1 1. 2. 3. CAUTION Do not let A-frame go past center. It will free and damage equipment. Operate rear winch, refer to paragraph 4-14b, to raise A-frame (1) up to about an 80° position. Reset boom chains (2) to support A-frame (1) in this position. CAUTION Too much slack will allow A-frame to smash down on cab roof. Take hook end of winch cable (3) from left center lashing ring (4) and hook it onto pintle (5). Leave a small amount of slack (about 2 feet) in winch cable. GO TO FRAME 3 4-279