TM 9-2320-209-10-1 FRAME 7 1. WARNING Do not overload winch or operate it with less than four turns of cable on drum; either condition can damage winch. Do not allow personnel near calbe during winch operation. If cable should snap or fray it can cause serious injury. CAUTION Do not force winch clutch lever (1) or the clutch and get damaged. Shift winch clutch lever (1) to on position, (toward left side of truck). NOTE If winch clutch lever (1) is hard to shift, with powertake off shifting lever in on position, place transmission in gear and slip engine clutch slightly. GO TO FRAME 8 4-263