TM 9-2320-209-10-1 f. Unloading the Dump Truck by Spreading. FRAME 1 1. Start engine. (Refer to para 4-6b.) 2. Place truck so that tailgate (1) is over starting point of area to be spread. 3. pull handbrake lever (2) up, to on position. 4. Press clutch pedal (3) all the way down. 5. Place FRONT TRANSMISSION gearshift lever (4) in position N, and let clutch pedal (3) come up. 6. Rig tailgate (1) to swing open at bottom. (Refer to para. 4-13b.) Adjust tailgate chains (5) to control opening for material to be spread. GO TO FRAME 2 4-252