TM 9-2320-209-10-1 FRAME 8 1. To suction fill tank sections: (a) Take off padlock (1), lift cover clamp (2), and open filler cover (3) of tank section to be filled. (b) Place nozzle (4) into filler hole, press operating lever (5), and fill tank with amount of water required. (c) Use water level gage (6) (in rear compartment) to measure amount of water in rear section or water level gage (7) to measure amount of water in front section of tank. (d) Refer to para 4-10a for payload capacity. GO TO FRAME 9 4-168