TM 9-2320-209-10-1 FRAME4 1. With engine running, leave FRONT TRANSMISSION gearshift lever (1) in position N. WARNING Always use hand THROTTLE (2) to control engine speed when operating winch. Avoid sudden changes in speed or high speed. Do not run engine faster than 1,200 rpm as shown on tachometer (3). Rough, jerky operation may cause broken shear pins and snapped cables, damage to vehicle or injury to personnel. 2. Press down on clutch pedal (4). 3. Lift POWER TAKEOFF SHIFTS lever hinge lock (5) and move POWER TAKEOFF SHIFTS lever (6) to LOW for heavy loads, HI for normal loads. When in doubt, use LOW position. GO TO FRAME 4 4-67