TM-9-2920-257-30&P Maintenance and Parts Manual for 200 Amp M113 Generator Download
Page 96 of 111
TM 9-2920-257-30&P APPENDIX F ILLUSTRATED LIST OF MANUFACTURED ITEMS F-1. GENERAL This appendix includes complete instructions for making items authorized to be manufactured or fabricated at intermediate direct support maintenance. F-2. Generator disassemble and assembly requires the use of F-2. FABRICATED TOOLS Generator disassembly and assembly requires the use of fabricated tools. See figures F-1 through F-3 for materials and dimensions required to fabricate the necessary tools. F-3. SPECIAL EQUIPMENT a. A matched set of 35-inch V-belts (O.D.), NSN 3030-00-834-5935 is required for testing the generator. NOTE Matched set of V-belts, NSN 3030-00-834-5935 i S a four belt set; only three belts are needed. b. A 50 OHM, 300 watt rheostat, NSN 5905-00-497-0732, is needed for testing generator. See figure F-4. c. Testing generator requires fabricating special wiring harnesses, and a special bracket and a rheostat mounting box to be used with the test stand. See figures F-S and F-6 for materials and dimensions required for bracket and rheostat box fabrication. See figures F-7 through F-12 for materials and dimensions for wiring harness fabrication. Figure F-4. Rheostat F-1