TM-9-2920-257-30&P Maintenance and Parts Manual for 200 Amp M113 Generator Download
Page 69 of 111
TM 9-2920-257-30&P NOTE End housing (11) mounting foot should line up with front housing (12) mounting foot. (20.) Place end housing (11) on stator shell (12) and using arbor press (item 7, App D), press end housing onto stator shell until seated against shell (minimal force is required). (21.) Install nine new flanged locknuts (10) on stator shell studs. Tighten locknuts to 18 in-lb torque. CAUTION Care must be taken when pressing the bearing into the housing. Use caution as the bearing outer race begins to enter the end housing bore. Misalignment can damage the end housing. (22.) Using an arbor press (item 4, App D), press bearing (15) onto core and shaft assembly (4). Change 1 3-39