TM-9-2920-257-30&P Maintenance and Parts Manual for 200 Amp M113 Generator Download
Page 66 of 111
TM 9-2920-257-30&P (6.) Install rotor assembly (19) on shaft and core assembly (4). Place rotor over end of shaft with woodruff key slot (front of shaft). NOTE Center studs in core with slots in rotor plate. (7.) Apply primer (item 6, App B.) and sealing compound (item 7, App. B) to threads of core and shaft studs. Secure rotor (19) to core and shaft (4) with six flange nuts (24). Torque nuts to 45 in-lb. (8.) Support rotor (19) and shaft and core assembly (4) on blocks with the bearing surface down. (9.) Place front bearing (21) in front housing (18) on core and shaft (4). Using and arbor press (item 4, App D) press bearing onto shaft until inner race seats on shaft shoulder. (10.) Install retaining ring (20) on core and shaft assembly (4). 3-36 Change 1