TM-9-2920-257-30&P Maintenance and Parts Manual for 200 Amp M113 Generator Download
Page 63 of 111
TM 9-2920-257-30&P NOTE Scribe cover plate and front housing before removing cover plate (10.) Remove six screws (16) and cover (17) from front housing (18). NOTE There are two connector assembly configurations, both procedures for removal and repair are the same. (11.) Remove connector assembly from front of housing. Tag all leads. See page 3-6 steps 3 and 4 for procedure to remove connector assembly. NOTE Mark front housing and stator shell to insure proper alignment when generator is reassembled (12.) Remove nine flanged locknuts (10), front housing (18), with core and rotor attached from studs on stator housing (12). Discard locknuts. NOTE Light taps with a soft-faced mallet will help in the separation of the parts. Change 1 3-33