TM-9-2920-225-34 Technical Manual for M113 Generator Download
Page 73 of 262
TM 9-2920-225-34 g. Replacement. - FRAME 1 NOTE Have machine shop make fabricated installing tool ( 1). Refer to figure 2-4. 1. Using installing tool ( 1), place tapered end of tool into lip seals (2) through drive end of housing. Be sure that tool surface has no nicks or burrs. 2. Put rotor (3) and end housing (4) assembly into housing (5) and stator (6) assembly so that sliprings (7) enter recess in end of installing tool (1). 3. Carefully slide in rotor ( 3), forcing out installing tool (1) as rotor shaft goes in. 4. Aline scribe marks and put in six screws (8). GO TO FRAME 2 TA103558 2-57