TM-9-2920-225-34 Technical Manual for M113 Generator Download
Page 71 of 262
TM 9-2920-225-34 FRAME 1 I 1. If runout of sliprings (1) was more than 0.001 inch, send rotor (2) to machine shop to have sliprings turned down. See figure 2-3. END OF TASK TA103555 TA103556 Size and Fit Index of New Parts Wear Limits Item /Point of Measurement (inches) (inches) A Outside diameter of sliprings 0.920 to 0.930 0.880 Figure 2-3. Slipring (Model 3002AC ) Machining Allowable Wear Limits 2-55