TM-9-2920-225-34 Technical Manual for M113 Generator Download
Page 65 of 262
TM 9-2920-225-34 2-9. END HOUSING AND ROTOR ASSEMBLY . TOOLS: No special tools required SUPPLIES : End housing preformed packing Lip seal (2) Sleeve seal Ball bearing and roller bearing grease, MIL-G-18709 PERSONNEL: One EQUIPMENT CONDITION : Generator removed from vehicle, pulley removed from generator. a. Preliminary Procedures. (1) Clean generator before disassembly. Refer to para 1-3. (2) Remove drive end bell and regulator assembly. Refer to para 2-8. (3) Remove fan and hub assembly. Refer to para 2-7. . Removal. FRAME 1 1. Take out six screws (1) . NOTE Scribe a mark from end housing (2) to intermediate housing (3) so that housings can be put back the same way. 2. Take end housing (2) and rotor (4) assembly out of intermediate housing ( 3). NOTE When rotor (4) is taken out, brushes will fall out at drive end of intermediate housing (3). Take out brushes. END OF TASK TA103550 2-49