TM-9-2920-225-34 Technical Manual for M113 Generator Download
Page 49 of 262
TM 9-2920-225-34 (2) Repair. FRAME 1 1. If slipring (1) runout is more than 0.001 inches, send rotor (2) to machine shop to have sliprings turned down. Figure 2-1 gives slipring allowable wear limits for machine shop use. END OF TASK TA103533 TA103534 Size and Fit Index Item /Point of Measurement of New Parts Wear Limits (inches) (inches) A Outside diameter of sliprings 0.715 to 0.725 0.680 Figure 2-1. Slipring (Model AMA-5102UT) Allowable Wear Limits 2-33