TM-9-2920-225-34 Technical Manual for M113 Generator Download

TM 9-2920-225-34 d. Inspection and Repair. 1. 2. 3. 4. 5. 6. Measure Measure Measure Measure Measure Measure NOTE If parts are not within limits given in table 2-1, generator is nonrepairable. roller bearing outside diameter (1) and inside diameter (2). roller bearing inner race outside diameter (3) and inside diameter (4). outside diameter of sliprings (5). outside diameter of rotor shaft at roller bearing seat (6). outside diameter of rotor shaft at drive end bearing seat (7). drive end bearing inside diameter (8) and outside diameter (9). GO TO FRAME 2 Table 2-1. Rotor, Stator, and Drive End Bell Assembly Wear Limits Index Number 1 2 3 4 5 6 7 8 9 Item /Point of Measurement Roller bearing outside diameter Roller bearing inside diameter Roller bearing inner race outside diameter Roller bearing inner race inside diameter Outside diameter of sliprings Outside diameter of rotor shaft at roller bearing inner race seat Outside diameter of rotor shaft of drive end bearing seat Drive end bearing inside diameter Drive end bearing outside diameter Size and Fit of New Parts (inches) 1.2495 to 1.2500 0.7508 to 0.7519 0.7482 to 0.7487 0.4995 to 0.5000 0.715 to 0.725 0.5003 to 0.5006 0.7874 to 0.7877 0.7870 to 0.7874 2.0470 to 2.0475 Wear Limits (inches) None None None None 0.680 None None None None 2-28