TM-9-2920-225-34 Technical Manual for M113 Generator Download
Page 211 of 262
TM 9-2920-225-34 1. Check that nuts (1), washers (2), and screw (3) are not worn, stripped, bent or broken and that they have no damaged threads. If parts are damaged, get new ones. 2. Check that brush holder (4) is not cracked or broken. If brush holder is damaged, get a new one. 3. Check that brushes (5) are not oil soaked, that they have no loose leads, and that they are not less than 1/4 inch long. If brushes are worn or damaged, get new ones. GO TO FRAME 4 NOTE: CHECK ONLY THOSE PARTS WHICH ARE CALLED OUT IN THIS FRAME. PARTS WITHOUT CALLOUTS ARE SHOWN ONLY FOR REFERENCE PURPOSES OR ARE CHECKED IN ANOTHER FRAME. TA 103690 2-195