TM-9-2920-225-34 Technical Manual for M113 Generator Download
Page 198 of 262
TM 9-2920-225-34 FRAME 2 1. 2. 3. 4. Put block holder (1) on rotor shaft (2) with retaining ring (3). Put two drive blocks (4) and drive shaft (5) in block holder (l). Put coupling cover (6) in place. Put in six locking plates (7), 12 lockwashers (8), and 12 screws (9). Bend tabs on six locking plates (7). NOTE Follow-on Maintenance Action Required: 1. Replace slipring end housing. Refer to para 2-18. 2. Replace fan and hub assembly. Refer to para 2-17. END OF TASK TA 103681 2-182