TM-9-2920-225-34 Technical Manual for M113 Generator Download
Page 103 of 262
TM 9-2920-225-34 d. Cleaning. There are no special cleaning procedures needed. Refer to cleaning procedures given in para 1-3. e. Inspection and Repair. (1) Inspection. 1. 2. 3. 4. 5. 6. 7. Measure Measure Measure Measure Measure Measure Measure NOTE Readings for rotor (1) and drive end bell (2) must be within limits given in table 2-4. If readings are not within given limits, generator is nonrepairable. outside diameter of sliprings (3). outside diameter of slipring end of shaft (4). outside diameter of drive end of shaft bearing seat (5). outside diameter of drive end of shaft (6). inside diameter of drive end bell bearing bore (7). NOTE If bearing (8) is not within limits given in table 2-4, get a new bearing. outside diameter (9) of drive end bearing (8). inside diameter (10) of drive end bearing (8). GO TO FRAME 2 TA 103587 2-87