TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 87 of 856
FIELD MAINTENANCE GENERAL MAINTENANCE PROCEDURES INITIAL SETUP: Tools and Special Tools Tool Kit, General Mechanic's (WP 0104, Table 1, Item 113) Multimeter, Digital (WP 0104, Table 1, Item 70) Materials/Parts Antiseize Compound (WP 0103, Table 1, Item 4) Engine Oil (WP 0103, Table 1, Item 27) References TM 9-247 References (cont.) TM 9-214 WP 0106 TM 9-237 MIL-PRF-907 WP 0104 CLEANING Scope 1. Procedures for cleaning will be the same for a great percentage of parts and components. To avoid repetition of instructions, the general procedures for cleaning are detailed below. See TM 9-247 for additional information pertaining to cleaning. 2. Clean all parts before inspection, after repair, and before assembly. 3. Hands should be kept free of grease which can collect dust and dirt. 4. After cleaning, all parts should be covered or wrapped in plastic to protect them from dust and dirt. Castings WARNING Cleaning solvent is TOXIC and flammable. Wear protective goggles and gloves; use only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and do not breathe vapors. Keep away from heat or flame. Never smoke when using cleaning solvent. Failure to comply may result in injury, illness, or death to personnel. 1. Clean inner and outer surfaces of casting and all areas subject to oil and grease with cleaning solvent. 2. Remove sludge and gum deposits from castings with a stiff brush. TM 9-2815-205-24 0009 0009-1