TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 792 of 856
5. Fuel temperature correction factor (CFft). a. Measure fuel temperature at fuel filter outlet. b. Refer to following chart for fuel temperature correction factor (CFft). 8 6 4 2 0 -2 -4 -6 60 70 80 90 100 110 120 Fuel Temperature ºF Model 5063-5299 All Except Model 5063-5299 C o r r e c t i o n F a c t o r B H P MAINT_437 Figure 16. Fuel Temperature Correction Factor (CFft) in BHP. 6. Corrected brake horsepower (BHPc) is: BHPc = BHPo + CFa + CFsg + CFft 7. Minimum acceptable corrected brake horsepowers are as follows: Model 5063-5299 204 BHP Models 5063-5392, 5063-5393, and 5063-539L 261 BHP END OF TASK PREPARATION FOR STORAGE OR SHIPMENT Fuel System 1. Equip an auxiliary fuel container (Figure 17, Item 50) with a fuel line and fill container with a sufficient amount of preservation oil. 2. Locate the auxiliary fuel container (Figure 17, Item 50) to provide adequate pressure for proper supply of preservation oil to the fuel system. 3. Disconnect fuel line (Figure 17, Item 52) at inlet of fuel pump (Figure 17, Item 53) and connect auxiliary fuel line (Figure 17, Item 51). 4. Disconnect the engine fuel return at the quick disconnect coupling (Figure 17, Item 55). Connect a transparent plastic line (Figure 17, Item 54) at this point and insert opposite end into a suitable container to collect return fuel. Discard diluted preservation oil. TM 9-2815-205-24 0101 0101-20