TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 775 of 856
8 6 7 9 3 8 7 10 11 MODELS 5063-5392 5063-5393 5063-539L RIGHT VIEW MAINT_423 Figure 2. Remove Throttle Delay Lever and Rocker Shaft Bracket. 10. Loosen locknut (Figure 3, Item 17) and back out adjusting screw (Figure 3, Item 19) on control tube lever (Figure 3, Item 18). Slide injector control lever on injector control tube (Figure 3, Item 20) away from injector control rack (Figure 3, Item 22). 11. Remove bolt (Figure 3, Item 14), convex washer (Figure 3, Item 15), clamp (Figure 3, Item 16), and injector (Figure 3, Item 13) in cylinder head. CAUTION Injector clamp must not interfere with follower spring or exhaust valve springs when installed. Damage could occur to engine valve or injector clamp. 12. Install cylinder compression adapter (Figure 3, Item 21), clamp (Figure 3, Item 16), convex washer (Figure 3, Item 15), and bolt (Figure 3, Item 14) in injector tube. Torque bolt to 20–25 lb-ft (27–34 N·m). Connect cylinder compression tester (Figure 3, Item 12) to adapter. 12 13 14 15 16 17 18 19 20 21 22 MAINT_424 Figure 3. Remove Injector and Install Cylinder Compression Tester. TM 9-2815-205-24 0101 0101-3