TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 701 of 856
DISASSEMBLY - Continued CAUTION Use care not to damage piston pin while removing vacuum gage testers. 8. Punch a hole through center of one vacuum gage tester (Figure 3, Item 21) with a narrow chisel or punch and pry retainer from piston. Remove opposite retainer in same manner. Discard retainers. 9. Remove piston pin (Figure 3, Item 20) from piston assembly. 10. Separate piston skirt (Figure 3, Item 18) from piston dome (Figure 3, Item 16). 11. Remove ring seal (Figure 3, Item 17) from piston dome (Figure 3, Item 16). Discard ring seal. 12. Remove piston pin bushing (Figure 3, Item 19) from piston dome (Figure 3, Item 16). 13. Repeat Steps 1–8 for remaining piston and connecting rod assemblies (Figure 3, Item 9). 16 17 18 19 21 21 20 22 23 24 MAINT_373 Figure 3. Piston and Connecting Rod Disassembly. END OF TASK TM 9-2815-205-24 0095 0095-5