TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 697 of 856
SUSTAINMENT MAINTENANCE PISTON AND CONNECTING ROD REPLACEMENT (MODELS 5063-5392, 5063-5393, 5063-539L) INITIAL SETUP: Tools and Special Tools Tool Kit, General Mechanic's (WP 0104, Table 1, Item 113) Wrench, Torque, Dial, 0–175 Lb-Ft (WP 0104, Table 1, Item 120) Remover and Replace, (Piston Ring) (WP 0104, Table 1, Item 86) Reamer, Cylinder Ridge (WP 0104, Table 1, Item 78) Cleaner, Piston Ring Groove (WP 0104, Table 1, Item 18) Die Set, Metal Stamping, Hand (WP 0104, Table 1, Item 22) Ball Attachment, Micrometer (WP 0104, Table 1, Item 10) Inserter, Piston (Pin Retainer) (WP 0104, Table 1, Item 57) Tester, Vacuum Gage (Leak Detector, Piston Pin Retainer) (WP 0104, Table 1, Item 108) Compressor, Piston Ring (WP 0104, Table 1, Item 19) Clamp, Hold-Down, Cylinder Liner (WP 0104, Table 1, Item 17) Gage Set, Piston-Liner Thickness (WP 0104, Table 1, Item 45) Micrometer Set (Caliper Set, O/Side) (WP 0104, Table 1, Item 69) Vise, Machinist, 4” Jaw (WP 0104, Table 1, Item 117) Caps, Vise Jaw (WP 0104, Table 1, Item 16) Materials/Parts Antifreeze (WP 0103, Table 1, Item 3) Bolt, Machine Qty: (2) (WP 0105, Table 1, Item 131) Carbon Removing Compound (WP 0103, Table 1, Item 6) Cleaning Solvent (WP 0103, Table 1, Item 8) Materials/Parts (cont.) Crocus Cloth (WP 0103, Table 1, Item 10) Gage, Plastic, Green (WP 0103, Table 1, Item 15) Gage, Plastic, Red (WP 0103, Table 1, Item 16) Oil, Engine (WP 0103, Table 1, Item 27) Oil, Fuel (WP 0103, Table 1, Item 30) Packing, Preformed Qty: (2) (WP 0105, Table 1, Item 64) Retainer, Piston Pin Qty: (2) (WP 0105, Table 1, Item 128) Ring, Piston Qty: (2) (WP 0105, Table 1, Item 134) Ring, Piston (WP 0105, Table 1, Item 135) Ring Set, Oil Qty: (2) (WP 0105, Table 1, Item 138) Seal, Ring (WP 0105, Table 1, Item 130) Shortening Compound (WP 0103, Table 1, Item 58) Spacer Sleeve Qty: (2) (WP 0105, Table 1, Item 129) Stone, Sharpening X-Fine (WP 0103, Table 1, Item 62) Water Displacing Compound (WP 0103, Table 1, Item 69) Wood Block (WP 0103, Table 1, Item 71) References WP 0097 ASTM E1444 Equipment Condition Oil pan removed (WP 0063) Oil pump inlet tubes removed (WP 0065) Cylinder head removed (WP 0073) TM 9-2815-205-24 0095 0095-1