TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 665 of 856
ASSEMBLY - Continued NOTE Camshaft gear with timing marks of two circles and two triangles goes on right camshaft. 4. Align keyway in camshaft gear (Figure 9, Item 13) with Woodruff key in camshaft. Place camshaft gear on camshaft (Figure 9, Item 26). 5. Support camshaft (Figure 9, Item 26) and place 1-1/2 inch (38.10 mm) sleeve (Figure 9, Item 35) on top of camshaft gear (Figure 9, Item 13). Press camshaft gear tight against spacer sleeve (Figure 9, Item 27). 6. Measure clearance between spacer plate (Figure 9, Item 18) and camshaft (Figure 9, Item 26). Clearance should be 0.008–0.015 inch (0.203–0.381 mm ) with new parts and a maximum of 0.021 inch (0.533 mm) with used parts. 35 13 27 18 26 MAINT_347 Figure 9. Camshaft and Cam Gear Assembly. TM 9-2815-205-24 0092 0092-9