TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 647 of 856
DISASSEMBLY 1. If required, remove two dowel pins (Figure 2, Item 11) and two expansion plugs (Figure 2, Item 10) from front cover (Figure 2, Item 3). Discard plugs and pins. NOTE To remove oil seal with upper front cover installed, drill two holes in opposite sides of casing of oil seal. Thread sheet metal screws with flat washers into casing, and pry against flat washers until seals are removed. 2. Place inner face of front cover (Figure 2, Item 3) on wood blocks. Drive out two oil seals (Figure 2, Item 12). Discard seals. 10 3 10 11 11 12 MAINT_334 Figure 2. Upper Front Cover Disassembly. END OF TASK TM 9-2815-205-24 0090 0090-3