TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 571 of 856
REPAIR OR REPLACEMENT - Continued WARNING Dry cleaning solvent MIL-PRF-680 is toxic and flammable. Wear protective goggles and gloves and use in a well-ventilated area. Avoid contact with skin, eyes, and clothes. Do not breathe vapors. Do not use near open flame or excessive heat. The flash point is 100–138°F (38–59°C). If you become dizzy while using cleaning solvent, get fresh air immediately and seek medical aid. If contact with eyes is made, wash with water and get medical aid immediately. Failure to comply may result in injury, illness, or death to personnel. NOTE When using MIL-PRF-680 solvents, ensure MIL-PRF-680 solvent container is sealed. Store, handle and dispose unused and spent solvents in accordance with local procedures and plans. f. When part is flat, wash in cleaning solvent and dry with compressed air. g. Place part on second block (Figure 9, Item 33). Apply 600 grit lapping compound to block and repeat Steps 1.c.–1.f. h. Place part on third block (Figure 9, Item 33). Do not apply lapping compound to this block and repeat Steps 1.c.–1.f. 33 16 19 13 5 MAINT_283 Figure 9. Parts Placement on Lapping Block. END OF TASK TM 9-2815-205-24 0084 0084-11