TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 450 of 856
REMOVAL NOTE Steps 1 and 4 apply to throttle delay assembly used on right side of all except model 5063-5299. Place wiping rag over oil drain holes to prevent loss of parts. 1. Remove two nuts (Figure 1, Item 3), two lockwashers (Figure 1, Item 2), and U-bolt (Figure 1, Item 8) from throttle delay lever assembly (Figure 1, Item 9). Discard lockwashers. 2. Remove four screws (Figure 1, Item 7) fastening injector control tube brackets (Figure 1, Item 6) to cylinder head. 3. Disengage control rack levers (Figure 1, Item 11) from injector control racks (Figure 1, Item 1) and lift tube assembly (Figure 1, Item 10) from cylinder head. 4. Remove piston and link assembly (Figure 1, Item 5) from throttle delay bracket (Figure 1, Item 4). FRONT 3 4 5 6 7 8 1 9 10 11 2 3 2 MAINT_196 Figure 1. Injector Control Tube Removal. END OF TASK DISASSEMBLY NOTE Note shape and location of the yield and return springs during disassembly. 1. Injector control tube assembly (left or right) a. For left control tube assembly, remove bracket (Figure 2, Item 6) from front of tube. TM 9-2815-205-24 0072 0072-2