TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 439 of 856
INSTALLATION 1. Apply water displacing compound or equivalent to threads and to bolt head contact area (underside) of all flywheel-fastening bolts (Figure 4, Item 4). Fill threads completely with compound and remove excess. 2. Thread two guide studs (Figure 4, Item 7) into bolt holes of crankshaft (Figure 4, Item 1). WARNING Components of this engine are heavy and awkward to handle. Use correct lifting procedures, indicated lifting devices, and/or assistance from other personnel. Failure to comply may result in injury to personnel. NOTE Flywheel on model 5063-5299 is heavy. Use two 3/8-16 eye bolts and multiple leg sling to lift flywheel. 3. Guide flywheel assembly (Figure 4, Item 2) over guide studs (Figure 4, Item 7) and into bell of flywheel housing. 4. Install scuff plate (Figure 4, Item 3) and four self-locking bolts (Figure 4, Item 4). Snug bolts to hold plate and flywheel assembly in place against crankshaft. 5. Remove guide studs (Figure 4, Item 7) and install two remaining bolts (Figure 4, Item 4). Snug bolts. 6. Torque bolts (Figure 4, Item 4) to 48–52 lb-ft (65–71 N·m). 7. Turn bolts (Figure 4, Item 4) an additional 90–120 degrees to obtain required clamping force. 1 3 4 2 7 MODELS 5063-5392 5063-5393 5063-539L 2 7 MAINT_189 Figure 4. Flywheel Installation. TM 9-2815-205-24 0070 0070-7