TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 437 of 856
REPLACEMENT WARNING Components of this engine are heavy and awkward to handle. Use correct lifting procedures, indicated lifting devices, and/or assistance from other personnel. Failure to comply may result in injury to personnel. 1. Remove ring gear (Figure 2, Item 8) from flywheel assembly as follows: a. Place flywheel assembly (Figure 2, Item 2), crankshaft side down, on a solid flat surface or hardwood blocks which fit inside diameter of ring gear (Figure 2, Item 8). b. Drive gear (Figure 2, Item 8) off flywheel assembly (Figure 2, Item 2) using a brass drift and hammer. Work around circumference of ring gear to avoid binding. 8 2 MAINT_187 Figure 2. Flywheel Inspection. TM 9-2815-205-24 0070 0070-5