TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 436 of 856
CLEANING WARNING Cleaning solvent is TOXIC and flammable. Wear protective goggles and gloves; use only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and do not breathe vapors. Keep away from heat or flame. Never smoke when using cleaning solvent. Failure to comply may result in injury, illness, or death to personnel. Compressed air used for cleaning purposes will not exceed 30 PSI (207 kPa). Use only with protective equipment (goggles, face shield, gloves, etc.). Failure to comply may result in injury to personnel. 1. For model 5063-5299, wash clutch plate assembly with cleaning solvent and dry with compressed air. 2. Clean flywheel assembly with cleaning solvent. END OF TASK INSPECTION-ACCEPTANCE AND REJECTION CRITERIA 1. Check clutch plate assembly for broken or worn springs, cracked or worn plates, and worn hub splines. NOTE Although flywheels seldom require replacement, the flywheel ring gear may become worn due to normal usage or damaged by improper use of starting motor. If gear is worn or damaged, a replacement ring gear is required. Ring tooth loss, chips, or wear must not exceed 25% of teeth in more than three places or two adjacent teeth. 2. Check flywheel assembly for cracks, worn teeth, or other damage. Replace ring gear if necessary. 3. Check end of crankshaft and flywheel mating surfaces for fretting or brinelling. If this condition is present, lightly stone surfaces. END OF TASK TM 9-2815-205-24 0070 0070-4