TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 434 of 856
REMOVAL 1. On model 5063-5299, remove eight bolts (Figure 1, Item 6) and clutch plate assembly (Figure 1, Item 5) from flywheel assembly (Figure 1, Item 2). Discard bolts. 2. Remove two self-locking bolts (Figure 1, Item 4) from flywheel assembly (Figure 1, Item 2) and crankshaft (Figure 1, Item 1). Thread two guide studs (Figure 1, Item 7) in locations where bolts were removed. Discard bolts. 3. Remove remaining four self-locking bolts (Figure 1, Item 4) and scuff plate (Figure 1, Item 3). Discard bolts. WARNING Components of this engine are heavy and awkward to handle. Use correct lifting procedures, indicated lifting devices, and/or assistance from other personnel. Failure to comply may result in injury to personnel. NOTE Flywheel on model 5063-5299 is heavy. Use two 3/8-16 eye bolts and multiple leg sling to lift flywheel. 4. Break flywheel assembly (Figure 1, Item 2) loose from crankshaft and slide off guide studs. 5. Remove two guide studs (Figure 1, Item 7) from crankshaft (Figure 1, Item 1). TM 9-2815-205-24 0070 0070-2