TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 428 of 856
REMOVAL 1. Slide preformed packing (Figure 1, Item 1) off of support (Figure 1, Item 2). NOTE All engines, except those used in M1064 vehicles, use six bolts with six lockwashers to retain a six-hole front support to lower cover. Engines in M1064 vehicles use eight self-locking bolts with eight flat washers to retain an eight-hole front support to lower cover. 2. Remove bolts (Figure 1, Item 4), washers (Figure 1, Item 3), and support (Figure 1, Item 2) from lower front cover (Figure 1, Item 5). Discard lockwashers if used. 4 3 2 5 2 3 4 1 FRONT SUPPORT FOR M1064 VEHICLES ONLY MAINT_184 Figure 1. Engine Front Support Removal/Installation. END OF TASK INSTALLATION 1. Install support (Figure 1, Item 2), bolts (Figure 1, Item 4), and washers (Figure 1, Item 3) against lower front cover (Figure 1, Item 5). Torque bolts to 46–50 lb-ft (62–68 N·m). 2. Slide preformed packing (Figure 1, Item 1) on support (Figure 1, Item 2). END OF TASK END OF WORK PACKAGE TM 9-2815-205-24 0068 0068-2