TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 424 of 856
REMOVAL NOTE Secure flywheel or gear train to prevent crankshaft from turning during removal of crankshaft screw. 1. Remove screw (Figure 1, Item 1) and spacer ring (Figure 1, Item 2) from crankshaft. 2. Install screw (Figure 1, Item 1) in crankshaft. 1 2 MAINT_181 Figure 1. Crankshaft Hub Removal. NOTE Model 5063-5392 uses a hub (Figure 2, Item 4). 3. Using three-leg mechanical puller, remove outer cone (Figure 2, Item 5) and hub (Figure 2, Item 4) from crankshaft. 4. Remove inner cone (Figure 2, Item 3) from crankshaft. 5. Remove screw (Figure 2, Item 1) from crankshaft. 1 3 5 4 MAINT_182 Figure 2. Crankshaft Hub Installation. END OF TASK TM 9-2815-205-24 0067 0067-2