TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 403 of 856
REMOVAL - Continued 6. Remove seal (Figure 2, Item 22) and two gaskets (Figure 2, Item 21) from top of cylinder block. Discard seal and gaskets. 7. Remove gasket (Figure 2, Item 20) from rear of governor assembly (Figure 2, Item 15). Discard gasket. 8. For model 5063-5299, remove six screws (Figure 2, Item 19), six lockwashers (Figure 2, Item 17), six flat washers (Figure 2, Item 18), governor assembly (Figure 2, Item 15), and gasket (Figure 2, Item 14) from blower (Figure 2, Item 13) end plate. Discard gasket and lockwashers. 9. For models 5063-5392, 5063-5393, and 5063-539L, remove five screws (Figure 2, Item 19), short screw (Figure 2, Item 16), six lockwashers (Figure 2, Item 17), six flat washers (Figure 2, Item 18), governor assembly (Figure 2, Item 15), and gasket (Figure 2, Item 14) from blower (Figure 2, Item 13) end plate. Discard gasket and lockwashers. 10. Remove two clamps (Figure 2, Item 7) and hose (Figure 2, Item 8) from right fuel rod cover (Figure 2, Item 9). 13 20 21 22 21 14 15 9 7 8 7 18 17 16 18 19 17 MAINT_175 Figure 2. Governor and Blower Removal. END OF TASK TM 9-2815-205-24 0062 0062-3