TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 391 of 856
ASSEMBLY - Continued f. Place support under inner race of governor weight shaft bearing (Figure 5, Item 16). Start weight end of governor weight shaft (Figure 5, Item 12) into bearing. Press shaft until shoulder on shaft contacts inner race of bearing. g. Apply sealing compound to edge of new cup plug (Figure 5, Item 20). Press plug into blower drive support assembly (Figure 5, Item 11) until flush with support. h. Check clearance between fully extended governor weights (Figure 5, Items 24 and 29) and drive gear (Figure 5, Item 17). Clearance must be greater than 0.100 inch. 17 31 16 18 19 20 29 24 17 21 22 11 12 16 0.100 in. (2.54 mm) MAINT_169 Figure 5. Blower Drive Support Assembly. END OF TASK TM 9-2815-205-24 0060 0060-7