TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 370 of 856
REMOVAL 1. Remove three bolts (Figure 1, Item 5), fuel pump (Figure 1, Item 4), and gasket (Figure 1, Item 3) from flywheel housing. Discard gasket. 2. Remove drive coupling fork (Figure 1, Item 2) from drive adapter (Figure 1, Item 1). 1 2 3 4 5 MAINT_159 Figure 1. Fuel Pump Removal/Installation. END OF TASK INSTALLATION 1. Install new gasket (Figure 1, Item 3) on fuel pump (Figure 1, Item 4). 2. Place drive coupling fork (Figure 1, Item 2) on square end of drive shaft. 3. Align drive coupling fork (Figure 1, Item 2) with slots in drive adapter (Figure 1, Item 1) and install fuel pump (Figure 1, Item 4) on flywheel housing with fuel inlet hole in down and inboard position. 4. Install three bolts (Figure 1, Item 5) fastening fuel pump (Figure 1, Item 4) to flywheel housing. Torque bolts to 13–17 lb-ft (18–23 N·m). END OF TASK FOLLOW ON TASK 1. Install fuel lines (models 5063-5393 and 5063-539L) (WP 0051). 2. Install fuel lines (model 5063-5392) (WP 0050). END OF TASK END OF WORK PACKAGE TM 9-2815-205-24 0055 0055-2