TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 354 of 856
INSTALLATION - Continued NOTE Throughout the installation steps, refer to placement references and information that was marked and tagged to parts during removal steps. For engine models 5063-5299, 5063-5392, 5063-5393, and 5063-539L: To complete installation of fuel injectors for all cylinders, except #1 on right cylinder head assembly, do Steps 6 through 12 and 22 through 24. Mounting/use of eye brackets will vary from one cylinder location to another. (1) For cylinder #1 (left cylinder head assembly, only), an eye bracket will be mounted on the rear rocker arm shaft bracket. (2) For cylinder #2, an eye bracket will be mounted on both the front and rear rocker arm shaft brackets. (3) For cylinder #3, an eye bracket will be mounted on the front rocker arm shaft bracket. Steps 6 through 12, which follow, pertain to the two eye brackets mounted on the two rocker arm shaft brackets at cylinder #2. Adjust task step procedures as required, for installation of single eye brackets at other cylinders. 6. Raise two machine bolts (Figure 23, Items 27 and 33), front rocker arm shaft bracket (Figure 23, Item 26), rear rocker arm shaft bracket (Figure 23, Item 34), two eye brackets (Figure 23, Items 23 and 30), rocker arm shaft (Figure 23, Item 28), two exhaust valve rocker arms (Figure 23, Item 2), and fuel injector rocker arm (Figure 23, Item 3), as a unit, from upside-down position and carefully lower into mounting position on cylinder head assembly, exhaust valve stems (Figure 23, Item 5) and fuel injector plunger follower (Figure 23, Item 4) in the following manner: 27 23 26 4 5 28 3 2 33 30 34 28 MAINT_464 Figure 23. Cylinder #2 Rocker Arm Unit Reposition. TM 9-2815-205-24 0054 0054-16