TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 346 of 856
REMOVAL - Continued NOTE For engine models 5063-5299, 5063-5392, 5063-5393, and 5063-539L: To remove fuel injectors for all cylinders, except #1 on right cylinder head, do Steps 10 through 17. Mounting/use of eye brackets will vary from one cylinder location to another. (1) For cylinder #1 (left cylinder head assembly, only), an eye bracket will be mounted on the rear rocker arm shaft bracket. (2) For cylinder #2, an eye bracket will be mounted on both the front and rear rocker arm shaft brackets. (3) For cylinder #3, an eye bracket will be mounted on the front rocker arm shaft bracket. Steps 10 through 14, which follow, pertain to the two (2) eye brackets mounted on the two rocker arm shaft brackets at cylinder #2. Adjust task step procedures as required, for removal/installation of single eye brackets at other cylinders. 10. Remove machine bolt (Figure 11, Item 24) from eye bracket (Figure 11, Item 23), adjacent rear rocker arm shaft bracket (Figure 11, Item 25), and threaded mounting hole in cylinder head assembly. 25 24 23 MAINT_452 Figure 11. Adjacent Rear Shaft Bracket Machine Bolt Removal. 11. Loosen one machine bolt (Figure 12, Item 27) from eye bracket (Figure 12, Item 23), front rocker arm shaft bracket (Figure 12, Item 26), and rocker arm shaft (Figure 12, Item 28) until free of threaded mounting hole in cylinder head assembly. TM 9-2815-205-24 0054 0054-8