TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 326 of 856
REMOVAL 1. Disconnect inlet hose assembly (Figure 1, Item 3) from elbow (Figure 1, Item 2) in fuel pump (Figure 1, Item 1). Remove hose assembly (Figure 1, Item 3). 2. Disconnect outlet hose assembly (Figure 1, Item 4) from elbow (Figure 1, Item 5) in fuel pump (Figure 1, Item 1). Remove hose assembly (Figure 1, Item 4). 1 2 3 4 5 MAINT_152 Figure 1. Fuel Line Removal. 3. Remove screw (Figure 2, Item 14), lockwasher (Figure 2, Item 13), flat washer (Figure 2, Item 12), and clip (Figure 2, Item 16), on hose assembly (Figure 2, Item 15), from upper front cover (Figure 2, Item 11). Discard lockwasher (Figure 2, Item 13). If necessary, remove clip (Figure 2, Item 16) from hose assembly Figure 2, Item 15). 4. Disconnect hose assembly (Figure 2, Item 15) from tee (Figure 2, Item 8) in front of right cylinder head. Remove hose assembly (Figure 2, Item 15). 5. Remove screw (Figure 2, Item 21), lockwasher (Figure 2, Item 20), flat washer (Figure 2, Item 19), and clip (Figure 2, Item 18), on hose assembly (Figure 2, Item 6), from air inlet housing (Figure 2, Item 17). Discard lockwasher (Figure 2, Item 20). If necessary, remove clip (Figure 2, Item 18) from hose assembly (Figure 2, Item 6). 6. Disconnect hose assembly (Figure 2, Item 6) from tee (Figure 2, Item 8), in front of right cylinder head, and from elbow (Figure 2, Item 7) in rear of left cylinder head. Remove hose assembly (Figure 2, Item 6). 7. Loosen nut on two elbows (Figure 2, Item 9), at front of cylinder heads, and remove fuel crossover tube (Figure 2, Item 10). END OF TASK TM 9-2815-205-24 0051 0051-2