TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 322 of 856
REMOVAL 1. Remove screw (Figure 1, Item 1), lockwasher (Figure 1, Item 2), and clip (Figure 1, Item 3), on hose assembly (Figure 1, Item 12), from air inlet housing (Figure 1, Item 4). Discard lockwasher. If necessary, remove clip from hose assembly. 2. Disconnect hose assembly (Figure 1, Item 12) from tee (Figure 1, Item 11) at rear of left cylinder head and from elbow (Figure 2, Item 16) at front of right cylinder head. Remove hose assembly. If necessary, remove two clips (Figure 1, Item 13) from hose assembly. 3. Disconnect hose assembly (Figure 1, Item 10) from tee (Figure 1, Item 11) at rear of left cylinder head. Remove hose assembly. 4. Disconnect hose assembly (Figure 1, Item 6) from elbow (Figure 1, Item 7) in fuel pump (Figure 1, Item 9). Remove hose assembly. 5. Disconnect hose assembly (Figure 1, Item 5) from elbow (Figure 1, Item 8) in fuel pump (Figure 1, Item 9). Remove hose assembly. 1 2 3 4 5 6 7 8 9 10 11 12 13 MAINT_150 Figure 1. Fuel Line Removal. 6. Loosen nuts on two elbows (Figure 2, Item 14) at front of cylinder heads and remove fuel crossover tube (Figure 2, Item 15). END OF TASK TM 9-2815-205-24 0050 0050-2