TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 312 of 856
REMOVAL 1. Loosen four clamps (Figure 1, Item 10) and two hoses (Figure 1, Item 11) connecting crossover tube (Figure 1, Item 19) to water outlet elbow (Figure 1, Item 16) and to water outlet tee (Figure 1, Item 1). Slide clamps and hoses onto crossover tube. Remove tube and slide clamps and hoses off tube. 2. Remove two screws (Figure 1, Item 13), two lockwashers (Figure 1, Item 14), two flat washers (Figure 1, Item 15), water outlet elbow (Figure 1, Item 16), and gasket (Figure 1, Item 17) from right cylinder head. Discard lockwashers and gasket. 3. If necessary, remove plug (Figure 1, Item 12) from water outlet elbow (Figure 1, Item 16). 4. Remove two long screws (Figure 1, Item 4), one short screw (Figure 1, Item 6), three lockwashers (Figure 1, Item 3), three flat washers (Figure 1, Item 2), and bracket (Figure 1, Item 5) from water outlet tee (Figure 1, Item 1). Discard lockwashers. 5. Remove two screws (Figure 1, Item 7), two lockwashers (Figure 1, Item 8), two flat washers (Figure 1, Item 9), water outlet tee (Figure 1, Item 1), and gasket (Figure 1, Item 18) from left cylinder head. Discard gasket and lockwashers. 1 2 3 4 5 2 3 6 7 8 9 10 10 11 12 13 14 15 16 17 18 19 MAINT_143 Figure 1. Thermostat Housing and Crossover Tube Removal. TM 9-2815-205-24 0048 0048-2