TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 289 of 856
REMOVAL - Continued 7. Remove three glow plugs (Figure 2, Item 26) from left cylinder head. 8. Repeat Steps 5–7 above for the opposite side. 9. Disconnect and remove glow plug harness (Figure 2, Item 28) from glow plug controller (Figure 2, Item 29). 10. If necessary, remove four clips (Figure 2, Item 24) from glow plug harness (Figure 2, Item 28). 11. Remove two bolts (Figure 2, Item 15), two lockwashers (Figure 2, Item 16) four flat washers (Figure 2, Item 35), two nuts (Figure 2, Item 33) and glow plug controller (Figure 2, Item 29) from mounting bracket (Figure 2, Item 36) on front of engine. Discard lockwashers. 12. Remove two short screws (Figure 2, Item 30) two lockwashers (Figure 2, Item 31), and two flat washers (Figure 2, Item 32) from front of mounting bracket (Figure 2, Item 36). Remove two long screws (Figure 2, Item 17), two lockwashers (Figure 2, Item 18), and two flat washers (Figure 2, Item 19) from top of mounting bracket. Remove mounting bracket from engine. Discard lockwashers. LEFT SIDE LEFT SIDE RIGHT SIDE 15 16 17 18 19 22 23 24 24 24 24 25 26 27 28 29 33 34 35 36 14 30 31 32 MAINT_129 Figure 2. Glow Plug Controller and Mounting Hardware Removal. END OF TASK TM 9-2815-205-24 0045 0045-3