TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 277 of 856
REMOVAL - Continued 3. Remove bolt (Figure 2, Item 18), copper flat washer (Figure 2, Item 17), and ground wires of harness assembly (Figure 2, Item 13) from air box heater (Figure 2, Item 21). Discard copper flat washer. 4. Disconnect lead on harness assembly (Figure 2, Item 13) from solenoid valve (Figure 2, Item 19). 5. Disconnect ignition wire (Figure 2, Item 16) from bottom of ignition coil (Figure 2, Item 14) and spark igniter (Figure 2, Item 20). 6. Remove nut (Figure 2, Item 26), lockwasher (Figure 2, Item 27), nut (Figure 2, Item 24), and lockwasher (Figure 2, Item 25) from air pump (Figure 2, Item 15) and disconnect two leads of harness assembly (Figure 2, Item 13). Discard lockwashers. 7. Disconnect lead on harness assembly (Figure 2, Item 13) from top of ignition coil (Figure 2, Item 14). 8. Remove nut (Figure 2, Item 28), lockwasher (Figure 2, Item 29), two flat washers (Figure 2, Item 11), screw (Figure 2, Item 12), and clip (Figure 2, Item 10) from mounting bracket (Figure 2, Item 30). Discard lockwasher. 9. Remove wire wrap (Figure 2, Item 23) from ignition wire (Figure 2, Item 16), harness assembly (Figure 2, Item 13), and hose (Figure 2, Item 22). 10. Remove ignition wire (Figure 2, Item 16) and harness assembly (Figure 2, Item 13) from engine. 12 11 10 13 13 14 13 17 16 16 15 18 11 30 13 19 20 21 22 23 29 28 13 27 26 13 25 24 MAINT_122 Figure 2. Air Box Heater Hardware Removal. TM 9-2815-205-24 0044 0044-3