TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 258 of 856
INSTALLATION 1. Loosely install support (Figure 6, Item 43), two flat washers (Figure 6, Item 66), two new lockwashers (Figure 6, Item 65), and two screws (Figure 6, Item 64) on upper front cover. 2. Loosely install bracket assembly (Figure 6, Item 44), screw (Figure 6, Item 61), flat washer (Figure 6, Item 62), new lockwasher (Figure 6, Item 68), and nut (Figure 6, Item 67) on support (Figure 6, Item 43). 3. Install two hardened washers (Figure 6, Item 59) and two screws (Figure 6, Item 60) on bracket assembly (Figure 6, Item 44) into blower (Figure 6, Item 69). Torque two screws (Figure 6, Item 64) to 46–50 lb-ft (62–68 N·m), nut (Figure 6, Item 67) to 30–35 lb-ft (41–47 N·m), and screws (Figure 6, Item 60) to 55–60 lb-ft (75–81 N·m). 4. For model 5063-5299: a. If removed, install pipe nipple (Figure 6, Item 57) and tee (Figure 6, Item 56). Install adapter (Figure 6, Item 58) and adapter (Figure 6, Item 71) into hose. b. Connect hose assembly (Figure 6, Item 70) to elbow (Figure 6, Item 63) on air pump (Figure 6, Item 45) and then to tee (Figure 6, Item 56). 56 57 58 59 60 61 63 64 71 70 69 68 67 66 65 62 45 44 43 MAINT_111 Figure 6. Air Box Heater Air Pump Hardware Installation. TM 9-2815-205-24 0042 0042-6