TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 248 of 856
INSTALLATION - Continued 5. Using new wire (Figure 2, Item 8) and wire twister pliers, install insulation cover (Figure 2, Item 2) as follows: a. Loop new wire around first capstan (Figure 2, Item 9) and apply two twists using wire twister pliers. b. While holding insulation cover in place by hand, place ends of new wire on each side of adjacent capstan (Figure 2, Item 10) and apply at least two more twists using wire twister pliers. c. Trim new wire 3/4 inch from second capstan (Figure 2, Item 10). 8 9 10 2 MAINT_103 Figure 2. Insulation Cover Installation. d. Repeat Steps 5.a. – 5.c. for remaining pairs of capstans. 6. Repeat Steps 1–5 for opposite manifold. END OF TASK FOLLOW ON TASK 1. Install glow plug harness brackets (model 5063-539L) (WP 0045). 2. Install exhaust tube couplings (models 5063-5393 and 5063-539L) (WP 0038). 3. Install exhaust tube couplings (model 5063-5392) (WP 0037). END OF TASK END OF WORK PACKAGE TM 9-2815-205-24 0039 0039-4