TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 246 of 856
REMOVAL NOTE Models 5063-5392, 5063-5393, and 5063-539L have insulator sets or insulation covers on exhaust manifolds. Right and left exhaust manifolds and insulation covers are identical. Use same procedure to remove both sides. 1. Cut and remove wires (Figure 1, Item 8) connecting capstans on exhaust manifold insulation cover (Figure 1, Item 7). Discard wires. 2. Remove exhaust manifold insulation cover (Figure 1, Item 7) from exhaust manifold (Figure 1, Item 5). NOTE Model 5063-539L has two brackets (Figure 1, Item 6) located on the second and third studs of the right and left sides. 3. Remove four locknuts (Figure 1, Item 1), bracket (Figure 1, Item 6), four spring washers (Figure 1, Item 2), exhaust manifold (Figure 1, Item 5), and gasket (Figure 1, Item 3) from cylinder head. Discard locknuts and gasket. 4. For model 5063-539L, remove four locknuts (Figure 1, Item 1), two brackets (Figure 1, Item 6), four spring washers (Figure 1, Item 2), exhaust manifold (Figure 1, Item 5), and gasket (Figure 1, Item 3) from cylinder head. Discard locknuts and gasket. 1 2 3 4 5 2 6 1 7 8 MODEL 5063-539L MAINT_102 Figure 1. Exhaust Manifold Removal/Installation. 5. Repeat Steps 1–4 for opposite manifold. END OF TASK TM 9-2815-205-24 0039 0039-2