TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 239 of 856
INSTALLATION - Continued 3. Install insulator set (Figure 1, Item 1) on exhaust tube (Figure 1, Item 2), insulator set (Figure 1, Item 8) on exhaust tube (Figure 1, Item 9), and insulator set (Figure 1, Item 7) on exhaust tee (Figure 1, Item 6). Fasten insulator sets together using new wire (Figure 1, Item 10) and wire twister pliers as follows: a. Loop new wire around first capstan (Figure 2, Item 12) and apply two twists using wire twister pliers. b. While holding insulator set in place by hand, place ends of new wire on each side of adjacent capstan (Figure 2, Item 13) and apply at least two more twists using wire twister pliers. c. Trim new wire 3/4 inch (20 mm) from second capstan. d. Repeat Steps 3.a. – 3.c. for remaining pairs of capstans on insulator sets. 12 13 MAINT_097 Figure 2. Insulator Set Installation. END OF TASK FOLLOW ON TASK Install turbocharger (WP 0035). END OF TASK END OF WORK PACKAGE TM 9-2815-205-24 0037 0037-3/blank