TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 238 of 856
REMOVAL 1. Cut wires (Figure 1, Item 10) on insulator sets (Figure 1, Items 1, 8, and 7). Remove insulator sets from exhaust tubes (Figure 1, Items 2 and 9) and exhaust tee (Figure 1, Item 6). Discard wires. 2. Loosen four couplings (Figure 1, Item 3) on exhaust tubes (Figure 1, Items 2 and 9). Slide couplings onto exhaust tubes and remove couplings, exhaust tubes, and exhaust tee. 3. If necessary, remove four studs (Figure 1, Item 5) from exhaust tee (Figure 1, Item 6). 1 2 3 4 6 3 3 3 11 11 7 5 7 8 10 9 8 MAINT_096 Figure 1. Exhaust Tubes and Tee Removal/Installation. END OF TASK INSPECTION-ACCEPTANCE AND REJECTION CRITERIA Check for cracks on exhaust tube flanges. END OF TASK INSTALLATION 1. If removed, install four studs (Figure 1, Item 5) in exhaust tee (Figure 1, Item 6). 2. Install right exhaust tube (Figure 1, Item 2), left exhaust tube (Figure 1, Item 9), exhaust tee (Figure 1, Item 6), and four couplings (Figure 1, Item 3) on exhaust manifolds (Figure 1, Item 11). Tighten nuts (Figure 1, Item 4) on couplings until compressed. TM 9-2815-205-24 0037 0037-2