TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 226 of 856
ADJUSTMENT 1. Assemble engine cradle (Figure 1, Item 3) and maintenance stand (Figure 1, Item 10) together using hole location number 5 (Figure 1, Item 11). 2. Install four engine mounting brackets (Figure 1, Item 9), eight bolts (Figure 1, Item 6), eight flat washers (Figure 1, Item 8), and eight new lockwashers (Figure 1, Item 7) to engine block (two bolts per bracket). Leave brackets loose for adjustment. 1 2 2 4 5 10 11 6 7 8 9 9 3 POSITION OF CRADLE ASSEMBLY ON MAINTENANCE STAND MOUNTING BRACKET (NO. 5 HOLE) MAINT_092 Figure 1. Engine Maintenance Stand View. END OF TASK INSTALLATION 1. Attach a beam-type sling to engine lifting brackets and lift engine onto maintenance stand (Figure 1, Item 10). 2. Install four bolts (Figure 1, Item 1), four new lockwashers (Figure 1, Item 4), eight flat washers (Figure 1, Item 2), and four nuts (Figure 1, Item 5) in four mounting brackets (Figure 1, Item 9) and side rails of cradle (Figure 1, Item 3). Tighten stand and bracket bolts. END OF TASK REMOVAL 1. Attach beam-type lifting sling to engine lifting brackets with engine on maintenance stand (Figure 1, Item 10). 2. Remove four bolts (Figure 1, Item 1), four lockwashers (Figure 1, Item 4), eight flat washers (Figure 1, Item 2), and four nuts (Figure 1, Item 5) connecting four mounting brackets (Figure 1, Item 1) to side rails of cradle (Figure 1, Item 3). Discard lockwashers. TM 9-2815-205-24 0034 0034-2